+86 137-01177563
+86 551-65689768
mingtengmotor@yandex.com
|
EN
WhatsApp
+86 137-01177563
+86 551-65689768
mingtengmotor@yandex.com
|
EN
WhatsApp
MinGteng Motor
Ultra-efficient three-phase synchronous motor
with low voltage permanent magnets
Specialist in improving the energy efficiency of electric motors
Service maintenance
Shefmontazh
We work in Russia
For consultation
Leave a request and we will contact you as soon as possible!
TYCX series (380v, 660v h90 — 355) with low pressure permanent magnet
Ultra-efficient three-phase synchronous motor
Seat length description: S - short seat; M - central seat; L - long room
Product range
The performance indicators of this series of products comply with GB 30 253 — 2013 "Energy efficiency limit value and energy efficiency class of permanent magnet synchronous motor" and GB / T27744 — 2021 "Technical conditions and energy efficiency classification of permanent magnet synchronous motor with asynchronous start (basic number 80 — 355)" Level 1 standard, and reach the international advanced level of similar products.
The products of this series are fully enclosed, self-cooling structure.
It has the following advantages: new design, compact structure, beautiful appearance, high efficiency and power factor, good starting torque, low noise, low vibration, safe and reliable operation, high efficiency and energy saving.
This series of products has a seat range of 90 ~ 355, the power class and installation dimensions are fully in line with the standards of the International Electrotechnical Commission (IEC). The electric motor is equipped with class F insulation, Motors with seat numbers above H180 are equipped with oil injection and drain devices. Show more
The products of this series are fully enclosed, self-cooling structure.
It has the following advantages: new design, compact structure, beautiful appearance, high efficiency and power factor, good starting torque, low noise, low vibration, safe and reliable operation, high efficiency and energy saving.
This series of products has a seat range of 90 ~ 355, the power class and installation dimensions are fully in line with the standards of the International Electrotechnical Commission (IEC). The electric motor is equipped with class F insulation, Motors with seat numbers above H180 are equipped with oil injection and drain devices. Show more
The performance indicators of this series of products comply with GB 30 253 — 2013 "Energy efficiency limit value and energy efficiency class of permanent magnet synchronous motor" and GB / T27744 — 2021 "Technical conditions and energy efficiency classification of permanent magnet synchronous motor with asynchronous start (basic number 80 — 355)" Level 1 standard, and reach the international advanced level of similar products.
The products of this series are fully enclosed, self-cooling structure.
It has the following advantages: new design, compact structure, beautiful appearance, high efficiency and power factor, good starting torque, low noise, low vibration, safe and reliable operation, high efficiency and energy saving.
This series of products has a seat range of 90 ~ 355, the power class and installation dimensions are fully in line with the standards of the International Electrotechnical Commission (IEC). The electric motor is equipped with class F insulation, Motors with seat numbers above H180 are equipped with oil injection and drain devices. Show more
The products of this series are fully enclosed, self-cooling structure.
It has the following advantages: new design, compact structure, beautiful appearance, high efficiency and power factor, good starting torque, low noise, low vibration, safe and reliable operation, high efficiency and energy saving.
This series of products has a seat range of 90 ~ 355, the power class and installation dimensions are fully in line with the standards of the International Electrotechnical Commission (IEC). The electric motor is equipped with class F insulation, Motors with seat numbers above H180 are equipped with oil injection and drain devices. Show more
The products of this series can completely replace low-voltage asynchronous motors Y2, Y3, YE2 and other series. According to the customer’s wishes, it is possible to increase the specific power of the electric motor, design an individual design, and develop products with different cooling methods and voltage levels.
TYPCX series (380v h90 — 355) with low pressure permanent magnet
Ultra-efficient three-phase synchronous motor
Seat length description: S - short seat; M - central seat; L - long room
Product range
The performance indicators of this series of products comply with GB 30 253 - 2013 "Energy efficiency limit value and energy efficiency class of permanent magnet synchronous motor" and GB / T27744 - 2021 "Technical conditions and energy efficiency classification of permanent magnet synchronous motor with asynchronous starting (seat number 80 - 355)".
This series adopts high efficiency fan or independent fan design, IP55 protection grade, insulation level F, S1 working mode.
The rated voltage of this series is 380V, powered by frequency converter, and operates with constant torque below the rated frequency.
The products of this series operate in the load range from 25% to 120%, and have higher efficiency, wider operating range and significant energy saving effect than asynchronous motors of the same specification. The increase in motor temperature is insignificant. At rated load, the increase in motor temperature is 30-50K.
This series adopts high efficiency fan or independent fan design, IP55 protection grade, insulation level F, S1 working mode.
The rated voltage of this series is 380V, powered by frequency converter, and operates with constant torque below the rated frequency.
The products of this series operate in the load range from 25% to 120%, and have higher efficiency, wider operating range and significant energy saving effect than asynchronous motors of the same specification. The increase in motor temperature is insignificant. At rated load, the increase in motor temperature is 30-50K.
The performance indicators of this series of products comply with GB 30 253 - 2013 "Energy efficiency limit value and energy efficiency class of permanent magnet synchronous motor" and GB / T27744 - 2021 "Technical conditions and energy efficiency classification of permanent magnet synchronous motor with asynchronous starting (seat number 80 - 355)".
This series adopts high efficiency fan or independent fan design, IP55 protection grade, insulation level F, S1 working mode.
The rated voltage of this series is 380V, powered by frequency converter, and operates with constant torque below the rated frequency.
The products of this series operate in the load range from 25% to 120%, and have higher efficiency, wider operating range and significant energy saving effect than asynchronous motors of the same specification. The increase in motor temperature is insignificant. At rated load, the increase in motor temperature is 30-50K.
This series adopts high efficiency fan or independent fan design, IP55 protection grade, insulation level F, S1 working mode.
The rated voltage of this series is 380V, powered by frequency converter, and operates with constant torque below the rated frequency.
The products of this series operate in the load range from 25% to 120%, and have higher efficiency, wider operating range and significant energy saving effect than asynchronous motors of the same specification. The increase in motor temperature is insignificant. At rated load, the increase in motor temperature is 30-50K.
The products of this series can completely replace low-voltage asynchronous motors Y2, Y3, YE2 and other series. According to the customer's wishes, it is possible to increase the specific power of the electric motor, design an individual design, and develop products with different cooling methods and voltage levels.
TYCX series (380v, 660v H355 - 450) with low pressure and high power permanent magnets
Ultra-efficient three-phase synchronous motor
Seat length description: S - short seat; M - central seat; L - long room
Product range
The performance indicators of this product series reach GB 30 253−2013 "Synchronous electric motor with permanent magnets. Level 1 standard "Energy efficiency limit and energy efficiency level".
This product series has a fully enclosed structure with fan cooling, protection class IP55, insulation class F, operating mode S1.
The products of this series have a rated frequency of 50 Hz, a rated voltage of 380 V or 660 V, have the ability to self-start, and can also be started with frequency conversion. In the load range from 25% to 120%, compared with asynchronous motors of the same specification, they have higher efficiency and more economical operation, which gives a significant energy-saving effect. The increase in engine temperature is insignificant; at the rated load of the electric motor, the increase in machine temperature is 30−50K.
This product series has a fully enclosed structure with fan cooling, protection class IP55, insulation class F, operating mode S1.
The products of this series have a rated frequency of 50 Hz, a rated voltage of 380 V or 660 V, have the ability to self-start, and can also be started with frequency conversion. In the load range from 25% to 120%, compared with asynchronous motors of the same specification, they have higher efficiency and more economical operation, which gives a significant energy-saving effect. The increase in engine temperature is insignificant; at the rated load of the electric motor, the increase in machine temperature is 30−50K.
The performance indicators of this product series reach GB 30 253−2013 "Synchronous electric motor with permanent magnets. Level 1 standard "Energy efficiency limit and energy efficiency level".
This product series has a fully enclosed structure with fan cooling, protection class IP55, insulation class F, operating mode S1.
The products of this series have a rated frequency of 50 Hz, a rated voltage of 380 V or 660 V, have the ability to self-start, and can also be started with frequency conversion. In the load range from 25% to 120%, compared with asynchronous motors of the same specification, they have higher efficiency and more economical operation, which gives a significant energy-saving effect. The increase in engine temperature is insignificant; at the rated load of the electric motor, the increase in machine temperature is 30−50K.
This product series has a fully enclosed structure with fan cooling, protection class IP55, insulation class F, operating mode S1.
The products of this series have a rated frequency of 50 Hz, a rated voltage of 380 V or 660 V, have the ability to self-start, and can also be started with frequency conversion. In the load range from 25% to 120%, compared with asynchronous motors of the same specification, they have higher efficiency and more economical operation, which gives a significant energy-saving effect. The increase in engine temperature is insignificant; at the rated load of the electric motor, the increase in machine temperature is 30−50K.
The products of this series can completely replace the low-voltage asynchronous motors Y2, Y3, YE2 and other series. According to the customer’s wishes, it is possible to increase the specific power of the electric motor, design an individual design, as well as develop individual products with different cooling methods and voltage levels.
Mining industry
Coal industry
Metallurgical industry
Steel industry
Port industry
Equipment application areas
Any questions left?
Fill in the fields and we will call you back shortly to consult
By clicking on the button, you consent to the processing of personal data.
+86 551-65689768
+86 137-01177563
mingtengmotor@yandex.com
006 Xichunhe Street, Shuanfeng Economic Development District, Hefei, Anhui Province
|
EN
WhatsApp
